Contacts
Address
Republic of South Africa, Gauteng, Johannesburg, 6 Skew Road Boksburg North 1460
Phones of enterprise
management
+27
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Ernest Lowe, Company
The original company, Ernest Lowe (a Division of Hudaco Industries Limited), was established some 110 years ago and developed into one of the leading hydraulic and pneumatic engineering companies in the Republic of South Africa.
After two mergers over the past two decades, namely with Messrs Hydrotube (Pty) Limited and Power Systems International, we are probably the largest local manufacturer and reconditioner of hydraulic cylinders in South Africa.
What We Offer
We design and manufacture two range of hydraulic cylinders, known as the HT 210 and HT 250 SERIES. A large part of our production is engaged in the manufacture of cylinders to customer’s individual requirements and specifications.
In the pneumatic field we are the licensed manufacturer of MARTONAIR cylinders in South Africa. We further manufacture our own range of cylinders as well as ‘special’ cylinders to meet customer’s requirements.
Our design and engineering facilities have the capabilities to manufacture and supply complete turnkey projects in both the hydraulic and pneumatic fields.
The Hydraulic Cylinder Workshop boasts honing machines that are capable of honing up to 8m long and 800mm in diameter. Our turning capabilities are up to 10m long with a maximum swing of 2m.
Semi-automated welding manipulators are utilised together with qualified MIG welders.
Lifting capacity is limited to 10 tons (should greater lifting capacity be required for special projects Ernest Lowe makes use of mobile cranes).
We at Ernest Lowe are proud of the high quality of our products and facilities and the fact of being a listed ISO 14001:2004, ISO 9001:2008 & OHSAS 18001 Company and as such, operate to these Standards.
In stock
directly controlled, electrically adjustable,
with position control
max. flow: 60 l/min.
max. operating pressure: 315 bar
Hole pattern according to DIN 24340-A6 und
ISO 4401-AB-03-4-A
without fixing screws
without connectors.
Group: Proportional pressure valves
In stock
Indirectly controlled, electrically adjustable
Hole pattern according to DIN 24340-A6 and ISO 6264-AB-03-4-C
without fixing screws
with connector
Max. operating pressure: 315 bar.
Group: Proportional pressure valves
In stock
Norgren Cylinders
ISO Standard Cylinders
VDMA / ISO Cylinders
Compact Cylinders
Rodless Cylinders
Piston Rod Guides
Piston Rod Locks
Non Rotating Cylinders
Impact Cylinders
Air Bellows
Rotary actuators
Linear Slides
Group: Pneumatic actuators
In stock
Pneumatically operated press safety valve, XSz series, with rotary unionClutch and brake in press technologyPneumatically operated clutch/brake combinationOverload protectionRoller feed controlSafety valves.
Group: Pipeline valves
In stock
Electrical connection according to DIN 43650 A
Fluid temperature: 0 °C to +100 °C
Ambient temperature: 0 °C to +80 °C
Switching pressure range pvu min…pvo max.
Maximum allowable pressure (bar): Even short pressure peaks must not exceed this value. The limit value corresponds to the maximum...
Group: Pressure relays
In stock
Standard M 12 x 1 electrical connection (IP 65)
Connector not included in the scope of delivery
Power supply: UB = 10 to 32 V DC
Reverse polarity protection.
Group: Pressure relays
In stock
Wide Range of Air-Line Filters
Lubricators - Micro Fog & Oil Fog
Wide Range of Air Pressure Regulators
Award Winning Quick Assembly Plug-In System
Direct Ported Units with Quick Mount System
Specialized Equipment, i.e. Air Breathing
Sets Soft-Start Dump Valves for Safety.
Group: Air filters
In stock
directly operated
hole pattern according to DIN 24340-A6 und
ISO 4401-AB-03-4A
without mounting bolts
with connectors
coils designed for DC voltage. AC operation via connector equipped with rectifier.
Group: Hydro valves
In stock
The inductive proximity sensors feature impact resistant potted electronic circuitry and abrasion resistant .035" to .048".The Double Blank Detection sensors prevent damage to dies and stamping machinery by detecting multiple blanks during the load sequence.
Group: Sensors
In stock
directly controlled
pneumatically operated
with mounting bolts
with HERION hole pattern
Right image:
indirectly controlled
with mounting bolts
with HERION hole pattern
Data sheet: HS_GB_1409_...
Group: Regulating hydraulic valves